Canon
imagePRESS V1000 Customer Expectations Document
Revision 4
imagePRESS V1000 Customer Expectations Document
Page 75
7.17 Perfect Binder-F1
Item
Specifications
Required Equipment
If using PRISMAsync controller, must have Advanced Imposition and
PRISMAprepare
Restricted Equipment
Not compatible with the Inspection Unit-B1 when using the PRISMAsync
controller
Bookbinding Thickness
10-200 sheets (80 g/m
2
) or up to approximately 1 inch (25 mm)
Bookbinding Method
Glue binder using hot melt on small glue tray, cutter to cut 3-side by rotating
booklet
Bypass Size
All media supported by the main engine
Book Size
5.4” x 8” – 8.5” x 11.7” (138 mm x 203 mm – 216 mm x 297 mm)
Cover Sheet Size
14.3” x 10.1” – 19.2” x 13” (364 mm x 257 mm – 487.7mm x 330.2 mm)
Contents Sheet Size
7.2” x 10.1 – 9” x 12.6” (182 mm x257 mm - 228.6 mm x 320 mm)
Paper Weight
Contents (bond):
14 lb – 43 lb (52-163 g/m
2
)
Cover:
33 lb – 111 lb (91-300 g/m
2
)
Margin Trimming
3 side, 1 side (foredge), or no trimming
Side: 0.3” to 2” (6.5 mm to 49.5 mm)
Top & Bottom: 0.3” to 1.6” (6.5 mm to 39.5 mm)
Tray Capacity
Approximately 1,000 sheets total or up to 5” (127 mm)
Waste Paper Capacity
15 books of 100 sheets contents
Warm-up Time
Less than 440 seconds
Power Source
208V AC, 50/60Hz, 3.0A
Maximum Power
Consumption
Approximately 630 W
Dimensions (W x D x H)
36.3” x 31.1” x 51.2” (922 mm x 791 mm x 1,300 mm)
Weight
Approximately 679lb (308kg)
10 With the imagePRESS D3000 controller, the Perfect Binder, Multi Function Professional Puncher, and GBC eWire
accessories can be attached, but inspection mode is not available when configured with the Inspection Unit. With the
PRISMAsync controller, the Perfect Binder, Multi Function Professional Puncher, and GBC eWire cannot be attached
when configured with the Inspection Unit.
47 Different specifications for using imagePRESS server.
48 Sheet vertical to horizontal ratio should be 1 to 1.25 – 1.5.
