Cause
Corrective Action
Printing does not proceed smoothly
because print jobs are interrupted
during transmission.
Exit other applications and cancel other print jobs.
In the Control Panel menu,
Adj.
Priority
is set to
Print Length
.
Setting
Adj. Priority
to
Print Quality
in the Control Panel menu and adjusting
the feed amount may improve results.
(See "
Adjusting the Feed Amount
.")
→P.833
The Printhead is out of alignment.
Adjust the Printhead alignment.
(See "
Automatic Adjustment to Straighten Lines and Colors (Head Posi.
Adj.)
.")
→P.827
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and see if they are clogged.
(See "
Checking for Nozzle Clogging
.")
→P.980
Streaks may occur if you set the
Print Quality
too low.
Choose a higher level of
Print Quality
in the
Advanced Settings
of the printer
driver and try printing again.
Printing in
Fast
or
Standard
mode is faster and consumes less ink than in
Highest quality
or
High
modes, but the printing quality is lower.
(See "
Giving Priority to Particular Graphic Elements and Colors for Print-
ing
.")
→P.64
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "
Loading Rolls in the Printer
.")
→P.784
(See "
Loading Sheets in the Feed Slot
.")
→P.809
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1.
Press the
Stop
button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Colors in printed images are uneven
Cause
Corrective Action
Line Drawing/Text
is selected when
printing images in many solid colors.
In
Print Priority
in the
Advanced Settings
of the printer driver, choose
Im-
age
.
You are printing on paper that curls
easily.
Printed colors may appear uneven on the leading edge of paper that is suscepti-
ble to curling. Select a stronger level in
VacuumStrngth
in the Control Panel
menu to increase suction against the paper, or specify a leading margin of 20
mm (0.79 in) or more.
(See "
Adjusting the Vacuum Strength (VacuumStrngth)
.")
→P.842
Printed colors may be uneven if you
set the
Print Quality
too low.
Choose a higher level of
Print Quality
in the
Advanced Settings
of the printer
driver.
Printing in
Fast
or
Standard
mode is faster and consumes less ink than in
Highest quality
or
High
modes, but the printing quality is lower.
(See "
Giving Priority to Particular Graphic Elements and Colors for Print-
ing
.")
→P.64
Color may be uneven between dark
and light image areas.
Select
Unidirectional Printing
in the
Advanced Settings
of the printer driver.
When borderless printing is used, the
edge of the paper is cut during print-
ing. Thus, ink density may be slight-
ly uneven at the leading edges.
Specify
No
in
Auto Cut
in the printer driver before printing. In this case, the
paper can be printed without borders on the left and right sides only. Cut the
printed document ejected from the printer, and then use scissors or a cutting
tool to cut away the edges on the top and bottom.
Troubleshooting
>
Problems with the printing quality
>
iPF6300S
Colors in printed images are uneven
12
1031
Summary of Contents for imagePROGRAF iPF6300S
