background image

7

9

In the 

Printer Selection

 window, select 

The printer is connected directly to a 

computer

 and click 

Next

10

In the 

Printer Installation

 dialog box, 

select 

Install with USB Connection

, and 

click 

Next

11

When the following dialog box is 

displayed, make sure the printer is on and 

use the USB cable to connect the printer 

to the computer. 

MEMO

• If a warning message is displayed, click 

Retry

 to try again. 

• Be careful not to insert the USB cable 

into the LAN port. 

12

After reviewing the installation results in 

the 

Complete Installation

 window, click 

Next

13

In the 

Finish

 window, select 

Restart my 

computer now

 and click 

Restart

When you restart the computer, the 

software settings are enabled. The 

software installation is now completed.

For TCP/IP (network) connections

Install the software 

4

In the 

Printer Selection

 window, select 

The printer is connected to computers 

in a network

 and click 

Next

When searching the available printer on 

the network

After reading the precautions in the 

Getting Ready

 window, select 

Find 

available printers in the network

 and 

click 

Next

Proceed to step 6.

When entering the printer's IP address 

manually

After reading the precautions in the 

Getting 

Ready

 window, select 

Specify the IP 

address of available printers in the 

network

 and click 

Next

.

Proceed to step 8.

55

• If the printer is already connected to 

the network, confirm the IP address 

assigned to the printer. Ask your 

network administrator for further 

information. 

1

Use the LAN cable to connect the LAN port 

on the back of the printer to the hub port.  

If the printer is already connected to the 

network, proceed to step 2.

MEMO

• If the printer is on, the Link indicator 

under the LAN port lights. 

1000Base-T 
connection

The top and bottom LEDs 
light.

100Base-TX 
connection

The LED on the bottom 
lights green.

10Base-T 
connection

The LED on the top lights 
orange.

2

Make sure the printer is on. 

Turn the computer on and insert the 

provided User Software CD-ROM for your 

operating system in the CD-ROM drive. 

3

Perform procedures of steps 2-8 on page 

6.

Summary of Contents for imagePROGRAF iPF6400S Series













Reviews: