background image

8

When searching the available printer on the network

Available printers are listed in the 

Search Results

 window. 

Select a printer from the list on either their 

IPv4 Devices

 or 

IPv6 Devices

 

tabs and click 

Next

.  

Select the printer with the 

IP Address Status

 is 

Available

, and then click 

Next

 to start installation. 

Proceed to step 9 in this case.

66

MEMO

• The 

IPv6 Devices

 tab is displayed in Windows 8, Windows 7, 

Windows Vista, Windows Server 2012, Windows Server 2008 R2, 

and Windows Server 2008.

• If the printer you want to use is not displayed in the list on the 

IPv6 

Devices

 tab, connect via IPv4 instead.

• If the printer you want to use is not displayed in the list of printers on 

the 

IPv4 Devices

 tab, refer to "When the printer cannot be found on 

the network" on page 9 to setup and configure an IP address for the 

printer. 

When searching the available printer on the network

In the 

Method of Configuring IP Addresses

 window, select the method of configuring the IP 

address as suitable for your system.

• To configure by directly entering the IP address

Select 

Configure manually

 in 

Method of Configuring IP Addresses

 and enter the IP address.

• To have the IP addresses allocated automatically using the DHCP server function

Select 

Configure automatically

. Note that other settings outside of the procedure are also 

required. ("Using DHCP", P.9)

Once you have selected the method for configuring IP addresses, enter your preferred name for 

the printer in 

Device Name

 and the installation location in 

Printer Location

 under 

Information 

About Printer to Configure

, and click 

Install

 to begin the installation.

Proceed to step 9.

77

10

In the 

Finish 

window, select 

Restart my 

computer now

 and click 

Restart

.  

11

When you restart the computer, the 

software settings are enabled. The 

software installation is now completed.

When entering the printer's IP address manually

In the 

IP Address Specification

 window, 

select either 

IPv4 Address

 or 

IPv6 

Address

 to enter the printer's IP address 

and click 

Install

The installation process begins.

• Ask your network administrator for the 

IP address, as needed.

MEMO

• The 

IPv6 Devices

 tab is displayed in 

Windows 8, Windows 7, Windows Vista, 

Windows Server 2012, Windows Server 

2008 R2, and Windows Server 2008.

9

After reviewing the installation results in 

the 

Complete Installation

 window, click 

Next

88

Summary of Contents for imagePROGRAF iPF6400S Series













Reviews: