iPF6400S Basic Guide
100
A
dju
stme
nts
fo
r B
ett
er
P
rin
t Q
ua
lity
A
dj
ust
ing
th
e f
eed amo
unt
5
Press
▲
or
▼
to select
Feed Priority
, and then press the
OK
button.
6
Press
▲
or
▼
to select
Adj. Priority
, and then press the
OK
button.
7
Press
▲
or
▼
to select
Automatic
,
Print Quality
, or
Print Length
, and then press the
OK
button.
Automatic Banding Adjustment
If printed images are affected by banding in different colors across the sheet, execute
Adj. Quality
for automatic adjustment of the paper feed amount.
There are two modes of automatic adjustment to correct banding:
Auto(GenuinePpr)
and
Auto(OtherPaper)
. In either mode, the printer prints and reads a test pattern for automatic
adjustment of the feed amount.
•
Auto(GenuinePpr)
Use this mode with paper identified in the Paper Reference Guide.
(See "Types of Paper.")
➔
User's Guide
•
Auto(OtherPaper)
Use this mode with paper not in the Paper Reference Guide, or if
Auto(GenuinePpr)
does not
eliminate banding.
(See "Types of Paper.")
➔
User's Guide
Important
• Adjustment is not possible with
Auto(GenuinePpr)
and
Auto(OtherPaper)
when using highly
transparent media.
In this case, use
Manual
adjustment.
(See "Manual Banding Adjustment.")
➔
User's Guide
Note
• We recommend executing the adjustment if you have changed the paper type or paper size.
• Always check the
Adj. Priority
values before using
Auto(GenuinePpr)
or
Auto(OtherPaper)
.
(See "Selecting a Feed Amount Adjustment Method.")
➔
P.99
• If additional fine-tuning is necessary after
Auto(GenuinePpr)
and
Auto(OtherPaper)
, execute
Adj. Fine Feed
.
(See "Fine-Tuning the Paper Feed Amount.")
➔
User's Guide
• Use
Adjust Length
to ensure that lines in CAD drawings are printed at exactly the right length.
(See "Adjusting Line Length.")
➔
User's Guide
• This may take some time, depending on the type of paper.
Items to Prepare
When Using Rolls
An unused roll at least 254.0 mm (10.00 in) wide
When Using Sheets
Auto(GenuinePpr)
: One sheet of unused paper, A4/Letter
size
Auto(OtherPaper)
: Two sheets of unused paper, A4/Letter
size (or one sheet when using A2)
Perform adjustment as follows.
1
Load the paper.
• "Loading Rolls on the Roll Holder"
➔
P.12
