iPF6400S Basic Guide
112
Tro
ubl
esho
otin
g
The p
rint
er
stop
s
during
a p
rint
job
The printer stops during a print job
An error message is shown on the Display Screen ...................................................................................... 112
The printer ejects blank, unprinted paper ..................................................................................................... 112
An error message is shown on the Display Screen
Cause
Corrective Action
The last portion of roll paper was used during a print job,
and paper could not be advanced because the trailing edge
is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
➔
P.17
(See "Removing Rolls From the Roll Holder.")
➔
User's
Guide
(See "Loading and Printing on Rolls.")
➔
User's Guide
The printer ejects blank, unprinted paper
Cause
Corrective Action
The leading edge of the roll paper
was cut to straighten it.
The leading edge of rolls may be cut to straighten it if
Trim Edge First
is set to a
value other than
Off
in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
➔
User's Guide
The Printhead nozzles are
clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.")
➔
User's Guide
A print job was received from an
incompatible printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer is damaged.
Contact your Canon dealer for assistance.
