iPF6400S Basic Guide
113
Tro
ubl
esho
otin
g
P
rob
lem
s w
ith t
he p
rin
tin
g q
ualit
y
Problems with the printing quality
Printing is faint .............................................................................................................................................. 113
Paper rubs against the printhead ................................................................................................................. 114
The edges of the paper are dirty .................................................................................................................. 115
The surface of the paper is dirty ................................................................................................................... 115
The back side of the paper is dirty ................................................................................................................ 116
Roller marks are left across the trailing edge of paper ................................................................................. 116
Immediately after borderless printing, the trailing edge margin is soiled during regular printing .................. 116
Printed colors are inaccurate ........................................................................................................................ 116
Banding in different colors occurs ................................................................................................................ 117
Colors in printed images are uneven ............................................................................................................ 118
Image edges are blurred or white banding occurs ........................................................................................ 119
Setting the Blue Switch on the Platen ................................................................................................ 120
The contrast becomes uneven during printing ............................................................................................. 122
The length of printed images is inaccurate in the feeding direction .............................................................. 122
Images are printed crooked .......................................................................................................................... 123
Documents are printed in monochrome ....................................................................................................... 123
Line thickness is not uniform ........................................................................................................................ 123
Lines or colors are misaligned ...................................................................................................................... 124
Borders appear during borderless printing ................................................................................................... 124
Printing is faint
Cause
Corrective Action
You may be printing on the
wrong side of the paper.
Print on the printing surface.
The Printhead nozzles are
clogged.
Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
➔
User's Guide
To check for nozzles after printing, set
Frequency
in
Nozzle Check
in the Control Panel
menu to a setting other than
Off
.
Furthermore, to have a warning displayed depending on the result of the nozzle check, set
Warning
in
Nozzle Check
in the Control Panel menu to
On
.
Note that when
Warning
is set to
On
, printing may stop depending on the content of the
warning.
(See "Menu Settings.")
➔
User's Guide
Because the printer was left
without ink tanks installed
for some time, ink has
become clogged in the ink
supply system.
After the ink tanks have been installed for 24 hours, run
Head Cleaning B
from the Control
Panel.
(See "Cleaning the Printhead.")
➔
P.55
Paper is jammed inside the
Top Cover.
Follow the steps below to remove the jammed piece of paper inside the Top Cover.
1. Open the Top Cover and make sure the Carriage is not over the Platen.
2. Remove any scraps of paper inside the Top Cover.
(See "Clearing Jammed Roll Paper.")
➔
P.102
(See "Clearing a Jammed Sheet, Fed Manually.")
➔
P.105
3. Close the Top Cover.
The ink was not dry when
paper was cut.
Specify a longer drying period in the Control Panel menu, in
Paper Details
>
Roll
DryingTime
.
(See "Menu Settings.")
➔
User's Guide
Printing may be faint if
Quality
in
Advanced
In
Advanced Settings
of the printer driver, choose
Highest quality
or
High
in
Quality
.
