iPF6400S Basic Guide
124
Tro
ubl
esho
otin
g
P
rob
lem
s w
ith t
he p
rin
tin
g q
ualit
y
Lines or colors are misaligned
Cause
Corrective Action
The Printhead is not being
aligned correctly.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.")
➔
P.97
(See "Manual Adjustment to Straighten Lines and Colors.")
➔
User's Guide
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing
paper, set the optimal Printhead height before aligning the printhead.
(See "Enhancing Printing Quality.")
➔
User's Guide
In the Control Panel menu, use a lower
Head Height
setting.
(See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
The type of paper specified
in the printer driver does not
match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
➔
P.14
(See "Loading Sheets in the Feed Slot.")
➔
P.21
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1. Press the
Stop
button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Depending on the type of
paper, printed lines may be
noticeably misaligned.
Specify
Proof
in
Print Priority
in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
➔
User's
Guide
Borders appear during borderless printing
Cause
Corrective Action
When executing borderless printing on A1 (594
mm) or A2 (420 mm) rolls, the Spacer for
Borderless Printing was not attached to the
Roll Holder.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the
included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
➔
P.12
The paper selected for borderless printing at
actual size was wider than the actual page
size.
For borderless printing at actual size, use roll paper that has the same
width as the actual page size.
(See "Borderless Printing at Actual Size.")
➔
User's Guide
There are spaces (margins) on the document.
Make sure there are no register marks or transparent objects on the
document.
Your application is configured to include
spaces (margins).
Check to see if your application is configured to include spaces
(margins).
BordlessOversize
is set to
Little
on the
Control Panel menu.
Set
BordlessOversize
to
Standard
on the Control Panel menu.
(See "Menu Settings.")
➔
User's Guide
