iPF6400S Basic Guide
31
Handl
ing
P
ape
r
H
andli
ng shee
ts
Important
• If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge
level. Accidentally removing the sheet at an angle may scratch the printed surface.
Removing heavyweight sheets from the front paper feed slot
1
On the
Tab Selection screen
of the Control
Panel, press
◀
or
▶
to select the Paper tab
(
).
Note
• If the
Tab Selection screen
is not displayed, press the
Menu
button.
2
Press the
OK
button.
The
Paper Menu
is displayed.
3
Press
▲
or
▼
to select
Eject Paper
, and then press the
OK
button.
4
Press
▲
or
▼
to select
Yes
, and then press the
OK
button.
As the printer ejects the paper, the paper is stopped momentarily with the trailing edge still held in
the rollers.
5
Press the
OK
button.
The sheet can now be removed.
6
Remove the sheet, keeping the front edge level
as you pull it out.
Important
• If
POP Board
is accidentally removed at an angle, it may scratch the printed surface.
7
Press the
OK
button.
