Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet
or other printer status information.)
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
"
Replace with a 16-inch wide or wider roll paper.
"
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet or other print-
er status information.)
Replace the roll with a roll 16 inches in width or larger as follows.
1.
Press
▲
or
▼
to select
Change Paper
, and then press the
OK
button.
(See "Removing the Roll from the Printer.")
➔
P.514
(See "Removing Rolls From the Roll Holder.")
➔
P.516
2.
Replace the roll with a roll 16 inches wide or larger.
(See "Loading Rolls on the Roll Holder.")
➔
P.507
(See "Loading Rolls in the Printer.")
➔
P.509
The printer will resume printing.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Cannot calibrate.
Cannot calibrate.
Cause
Corrective Action
The paper for printing a test pattern is soiled. Oth-
erwise, you have loaded colored paper.
Press the
OK
button to clear the error.
Load unused paper compatible with color calibration.
See the
Paper Reference Guide
.
(See "Displaying the Paper Reference Guide.")
➔
P.500
The test pattern was printed too faintly.
Press the
OK
button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
➔
P.950
Direct sunlight or strong lighting may be shining
on the printer and causing the sensor to malfunc-
tion.
Press the
OK
button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or strong
lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause
Corrective Action
The temperature or humidity
where the printer is installed is
out of the acceptable range for
operation.
Press
▲
or
▼
to select
Stop
, and then press the
OK
button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental conditions are
recommended for various types of paper. For details on the recommended environmental conditions, see
the
Paper Reference Guide
.
(See "Displaying the Paper Reference Guide.")
➔
P.500
Please execute common calibration.
Please execute common calibration.
Cause
Corrective Action
There is not even one Common calibration execution result.
Note that this is displayed when all of the following are satisfied.
•
If
Set Exec. Guide
is
On
in the Control Panel menu.
•
If the printer is loaded with a type of paper on which color calibration cannot be executed.
Execute Common calibration.
(See "Color Calibration Using the Printer Sen-
sor.")
➔
P.793
Set
Set Exec. Guide
to
Off
on the Control Pan-
el menu.
(See "Menu Structure.")
➔
P.628
Cannot calibrate.
iPF6400S
User's Guide
Error Message
Messages regarding printing or adjustment
984
Summary of Contents for imagePROGRAF iPF6400S Series
