Setting Item
Description, Instructions
Adjust
Printer
Head
Posi.
Adj.
Other
Manual
Input the setting values from the adjustment pattern printing
results and adjust the printing position to fix misaligned
printing. Normally, select
Standard
. However, when printing
on special paper, or if printing is not improved after
Stand-
ard
, try
Manual
Manual Adjustment to Straighten
Feed
Priority
Adj. Pri-
ority
Automatic
Specify exact paper feeding, if desired. Normally, select
Au-
tomatic
. Choose
Print Quality
for attractive printing.
Choosing
Print Quality
also makes banding less noticea-
ble. Choose
Print Length
if you prefer to feed the paper an
exact amount.
Print Quality
Print Length
Adj.
Quality
Auto(GenuinePpr)
Specify this mode with paper identified in the
Paper Refer-
ence Guide
.
Displaying the Paper Reference
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount.
Auto(OtherPaper)
Specify this mode with paper not in the
Paper Reference
Guide
.
Displaying the Paper Reference
The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. Note that this function takes
more time and consumes more ink than
Auto(Genu-
inePpr)
.
Manual
Use this mode with highly transparent media or other paper
for which
Auto(GenuinePpr)
or
Auto(OtherPaper)
cannot
be used.
Print a test pattern for adjustment of the feed amount based
on the type of paper.
Adjust
Length
Adjust-
ment-
Print
A:High
Print a test pattern for particular types of paper to compen-
sate for paper stretching or shrinkage, after which you enter
the amount of adjustment.
B:Standard/Draft
Change
Settings
A:High
Displayed when you have selected
Feed Priority
>
Adj.
Priority
>
Print Length
.
Adjustment relative to the amount of stretching or shrinkage
of the current paper.
Enter either the adjustment results from
AdjustmentPrint
or the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower ad-
justment value.
B:Standard/Draft
Adj Far Ed Feed
Choose
Yes
to adjust the feed amount for the trailing edge.
Mainte-
nance
Head Cleaning
Choose
Head Cleaning A
if printing is faint, oddly colored,
or contains foreign substances.
Choose
Head Cleaning B
if no ink is printed at all, or if
printing is not improved by
Head Cleaning A
.
Nozzle Check
Print a test pattern to check the nozzles.
Menu Settings
iPF6400SE
Control Panel
Printer Menu
478
Summary of Contents for imagePROGRAF iPF6400SE
