manualshive.com logo in svg

Canon imagePROGRAF iPF830, User Manual

The Canon imagePROGRAF iPF830 is a high-quality large format printer designed for professional use. To help users effortlessly set up and configure the printer, a detailed Setup Manual is provided. You can conveniently download this manual for free from our website, ensuring a smooth installation process.

Share
Download
background image

Cannot print over a network

Cannot print over a network

Cannot connect the printer to the network .....................................................................................................

628

Cannot print over a TCP/IP network ...............................................................................................................

628

Cannot print over a Bonjour network ..............................................................................................................

628

Cannot connect the printer to the network

Cannot connect the printer to the network

Cause

Corrective Action

The Ethernet cable
is not connected
correctly to the
printer's Ethernet
port.

1.

Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer
on. For instructions on connecting the cable, refer to the Setup Guide.

2.

Make sure the Link indicator is lit.
The top indicator is lit in green and the bottom indicator is lit in orange when the printer is connected via
1000Base-T.
The top indicator is lit in green when the printer is connected via 100Base-TX.
The bottom indicator is lit in orange when the printer is connected via 10Base-T.
If the Link indicator is not lit, check the following points.

•

Make sure the connection point is on.

•

Make sure the end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.

•

Make sure there is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.

•

Check the communication mode with the connection point.
Although the printer normally detects the communication mode and transmission rate of the communi-
cation point automatically (in auto negotiation mode), sometimes the communication point settings
cannot be detected. In this case, configure the connection method manually, specifying the communi-
cation mode in use.

 (See "

Configuring the Communication Mode Manually

.")

➔

P.489

Cannot print over a TCP/IP network

Cannot print over a TCP/IP network

Cause

Corrective Action

The printer's IP address is not config-
ured correctly.

Make sure the printer's IP address is configured correctly.

 (See "

Configuring the IP Address Using imagePROGRAF Device Setup Utility

.")

➔

P.491

 (See "

Configuring the IP Address Using the Printer Control Panel

.")

➔

P.480

The printer's TCP/IP network settings
are not configured correctly.

Make sure the printer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer's TCP/IP Network Settings With RemoteUI

.")

➔

P.484

The computer you are trying to print
from is not configured correctly.

Make sure the computer's TCP/IP network settings are configured correctly.

 (See "

Configuring the Printer Driver Destination (Windows)

.")

➔

P.483

 (See "

Configuring the Destination in TCP/IP Networks (Mac OS)

.")

➔

P.487

Cannot print over a Bonjour network

Cannot print over a Bonjour network

Cause

Corrective Action

The computer you are trying to
print from is not configured cor-
rectly.

Make sure the computer is configured correctly.

 (See "

Configuring the Destination for Bonjour Network (Mac OS)

.")

➔

P.487

The computer and printer are not
on the same network.

Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.

Cannot connect the printer to the network

                                                                                                                                                               

iPF830

                                                                                                                                                                                                                     

User's Guide

 

 

Troubleshooting

Cannot print over a network

 

628

Summary of Contents for imagePROGRAF iPF830









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePROGRAF iPF830

NEC 870 - SuperScript B/W Laser Printer Network Quickstart preview
870 - SuperScript B/W Laser Printer
Brand: NEC Pages: 8
TASKalfa 306ci First Steps preview
306ci
Brand: TASKalfa Pages: 36
Canon MG7700 series Getting Started preview
MG7700 series
Brand: Canon Pages: 2
Canon PIXMA TS5300 Series Getting Started preview
PIXMA TS5300 Series
Brand: Canon Pages: 16
Canon Pixma TR7600 Series Getting Started preview
Pixma TR7600 Series
Brand: Canon Pages: 12
Canon PIXMA MX420 Series Network Setup Troubleshooting preview
PIXMA MX420 Series
Brand: Canon Pages: 34
Canon PIXMA MX700 Series Cleaning Manual preview
PIXMA MX700 Series
Brand: Canon Pages: 7
Canon TS9500 Series Getting Started preview
TS9500 Series
Brand: Canon Pages: 44
Canon PIXMA MG3220 series Setup Manual preview
PIXMA MG3220 series
Brand: Canon Pages: 5
Canon iR2016 Series User Manual preview
iR2016 Series
Brand: Canon Pages: 92
Canon PIXMA TS6200 Series Getting Started preview
PIXMA TS6200 Series
Brand: Canon Pages: 100
Canon S830D Quick Start Manual preview
S830D
Brand: Canon Pages: 68
Canon MG6600 Series Manual preview
MG6600 Series
Brand: Canon Pages: 745
Canon SmartBase MPC400 Parts Catalog preview
SmartBase MPC400
Brand: Canon Pages: 76
Canon G4070 Series Getting Started preview
G4070 Series
Brand: Canon Pages: 59
Canon TR4600 Series Getting Started preview
TR4600 Series
Brand: Canon Pages: 40
Canon PIXMA MP150 User Manual preview
PIXMA MP150
Brand: Canon Pages: 129
Canon MB2100 Series Getting Started preview
MB2100 Series
Brand: Canon Pages: 4

Brands by name

Popular brands

Load more brands