manualshive.com logo in svg

Canon imagePROGRAF iPF830, User Manual

The Canon imagePROGRAF iPF830 is a high-quality large format printer designed for professional use. To help users effortlessly set up and configure the printer, a detailed Setup Manual is provided. You can conveniently download this manual for free from our website, ensuring a smooth installation process.

Share
Download
background image

Disposal of the product

Disposal of the product

WEEE Directive

WEEE Directive

Only for European Union and EEA (Norway, Iceland and Liechtenstein)

These symbols indicate that this product is not to be disposed of with your household waste, according to the
WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those
Directives.
If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indi-
cates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a
concentration above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when
you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equip-
ment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible impact
on the environment and human health due to potentially hazardous substances that are generally associated with
EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resour-
ces.
For more information about the recycling of this product, please contact your local city office, waste authority, ap-
proved scheme or your household waste disposal service or visit 

➔

 www.canon-europe.com/weee

, or

➔

 www.canon-europe.com/battery

.

Nur für Europäische Union und EWR (Norwegen, Island und Liechtenstein)

Diese Symbole weisen darauf hin, dass dieses Produkt gemäß WEEE-Richtlinie (2012/19/EU; Richtlinie über Elek-
tro- und Elektronik-Altgeräte), Batterien-Richtlinie (2006/66/EG) und nationalen Gesetzen zur Umsetzung dieser
Richtlinien nicht über den Hausmüll entsorgt werden darf.
Falls sich unter dem oben abgebildeten Symbol ein chemisches Symbol befindet, bedeutet dies gemäß der Batter-
ien-Richtlinie, dass in dieser Batterie oder diesem Akkumulator ein Schwermetall (Hg = Quecksilber, Cd = Cadmi-
um, Pb = Blei) in einer Konzentration vorhanden ist, die über einem in der Batterien-Richtlinie angegebenen Grenz-
wert liegt.
Dieses Produkt muss bei einer dafür vorgesehenen Sammelstelle abgegeben werden. Dies kann z. B. durch Rück-
gabe beim Kauf eines neuen ähnlichen Produkts oder durch Abgabe bei einer autorisierten Sammelstelle für die
Wiederaufbereitung von Elektro- und Elektronik-Altgeräten sowie Batterien und Akkumulatoren geschehen. Der un-
sachgemäße Umgang mit Altgeräten kann aufgrund potenziell gefährlicher Stoffe, die generell mit Elektro- und
Elektronik-Altgeräten in Verbindung stehen, negative Auswirkungen auf die Umwelt und die menschliche Gesund-
heit haben.
Durch Ihre Mitarbeit bei der umweltgerechten Entsorgung dieses Produkts tragen Sie zu einer effektiven Nutzung
natürlicher Ressourcen bei.
Um weitere Informationen über die Wiederverwertung dieses Produkts zu erhalten, wenden Sie sich an Ihre Stadt-
verwaltung, den öffentlich-rechtlichen Entsorgungsträger, eine autorisierte Stelle für die Entsorgung von Elektro-
und Elektronik-Altgeräten oder Ihr örtliches Entsorgungsunternehmen oder besuchen Sie

➔

 www.canon-europe.com/weee

, oder 

➔

 www.canon-europe.com/battery

.

Union Européenne, Norvège, Islande et Liechtenstein uniquement.

Ces symboles indiquent que ce produit ne doit pas être mis au rebut avec les ordures ménagères, comme le spéci-
fient la Directive européenne DEEE (2012/19/UE), la Directive européenne relative à l'élimination des piles et des
accumulateurs usagés (2006/66/CE) et les lois en vigueur dans votre pays appliquant ces directives.
Si un symbole de toxicité chimique est imprimé sous le symbole illustré ci-dessus conformément à la Directive rela-
tive aux piles et aux accumulateurs, il indique la présence d'un métal lourd (Hg = mercure, Cd = cadmium, Pb =
plomb) dans la pile ou l'accumulateur à une concentration supérieure au seuil applicable spécifié par la Directive.

WEEE Directive

                                                                                                                                                                                                      

iPF830

                                                                                                                                                                                                                     

User's Guide

 

 

Appendix

Disposal of the product

 

670

Summary of Contents for imagePROGRAF iPF830









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePROGRAF iPF830

Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Brand: Canon Pages: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Brand: Canon Pages: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Brand: Canon Pages: 2
Canon PIXMA TR4500 Series Getting Started preview
PIXMA TR4500 Series
Brand: Canon Pages: 100
U-Line ZEBRA ZD410 Manual preview
ZEBRA ZD410
Brand: U-Line Pages: 18
Konica Minolta PC-410 Installation Manual preview
PC-410
Brand: Konica Minolta Pages: 8
iDPRT iMOVE T3Pro User Manual preview
iMOVE T3Pro
Brand: iDPRT Pages: 74
Memjet AS-1180C Service Manual preview
AS-1180C
Brand: Memjet Pages: 181
A&D AD-8127 Instruction Manual preview
AD-8127
Brand: A&D Pages: 31
Agilent Technologies 8700 LDIR Long Term Shut Down And Start Up Instructions preview
8700 LDIR
Brand: Agilent Technologies Pages: 2
G&G IMAGE L2550DW Series User Manual preview
IMAGE L2550DW Series
Brand: G&G Pages: 147
Lexmark C6160 User Manual preview
C6160
Brand: Lexmark Pages: 142
Konica Minolta BIZHUB 8050 CF5001 Service Manual preview
BIZHUB 8050 CF5001
Brand: Konica Minolta Pages: 20
Skip-Line CP130 User Manual preview
CP130
Brand: Skip-Line Pages: 11
Konica Minolta BIZHUB C3351 Quick Start Manual preview
BIZHUB C3351
Brand: Konica Minolta Pages: 102
Konica Minolta MS6000 MKII User Manual preview
MS6000 MKII
Brand: Konica Minolta Pages: 102
Mayku Multiplier Quick Start Manual preview
Multiplier
Brand: Mayku Pages: 2
FujiFilm Printpix NC-400D User Manual preview
Printpix NC-400D
Brand: FujiFilm Pages: 47

Brands by name

Popular brands

Load more brands