manualshive.com logo in svg

Canon imagePROGRAF iPF830, User Manual

The Canon imagePROGRAF iPF830 is a high-quality large format printer designed for professional use. To help users effortlessly set up and configure the printer, a detailed Setup Manual is provided. You can conveniently download this manual for free from our website, ensuring a smooth installation process.

Share
Download
background image

Safety Precautions

Safety Precautions

Safety Precautions .........................................................................................................................................

664

Legal Notices .................................................................................................................................................

666

Safety Precautions

Safety Precautions

Follow the warnings and precautions below to use the printer safely. Do not perform any operations or procedures
other than as described in this manual. Doing so may result in unexpected accidents and can cause a fire or elec-
trical shocks.

Printer location

Warning

•

Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids. If these substances
come into contact with electrical components inside the printer, there is a risk of fire or electrical shock.

Caution

•

Never install the printer on an unstable or vibrating surface. If it falls over, this could cause personal injury.

•

Never set up the printer in a location that is exposed to high humidity or large amounts of dust, or exposed to
direct sunlight, high temperature, or open flame. This could cause a fire or electrical shock. Use the printer loca-
tion in an environment where temperature and humidity are within the ranges of 15 °C to 30 °C (59 °F to 86 °F)
and 10 to 80% RH (with no condensation).

•

Never place the printer on a heavy wool or shag carpet. The fibers may enter the printer and cause a fire.

•

Keep the area around the power outlet clear of items so that you can disconnect the power cable immediately if
the printer starts operating abnormally. In the event of a printer malfunction, remove the power cable from the
outlet as soon as possible to prevent fire and electrical shocks.

•

Do not install the printer near sources of strong electromagnetic fields, whether equipment that generates such
fields or places where such fields occur. This could damage the printer or cause malfunction.

Power Supply

Warning

•

Never handle the power cable with wet hands. Doing so may cause electrical shock.

•

Insert the power cable securely and completely into the power source. If the power cable is not inserted complete-
ly, this could cause a fire or electrical shock.

•

Do not use any power cable other than the one provided. This could cause a fire or electrical shock. Never use the
power cable with any other electrical device.

•

Never cut the power cable or attempt to modify it, and never stretch it or bend it forcefully. Never place a heavy
object on the power cable. Damaged sections of the power cable could cause a short circuit and may cause a fire
or electrical shock.

•

Never connect the power cable to a power strip or any power source shared by other electrical devices. This could
cause a fire or electrical shock.

•

Never knot the power cable or wrap it around itself. This could cause a fire or electrical shock.

•

Periodically disconnect the power cable and use a dry cloth to wipe away dust that has collected on the plug and
the area around the power outlet. Leaving the power cable plugged in and not cleaned for a long period, especial-
ly in an area subject to dust, oil, and humidity, could cause the insulation material to deteriorate and lead to a fire.

Caution

•

Always grip the plug to remove the power cable from the power outlet. Pulling on the power cable could damage
the cable and lead to a fire or electrical shock.

•

Never use an extension cord. This could cause a fire or electrical shock.

•

Never use any power source other than 100–120 / 220–240 V AC. This could cause a fire or electrical shock. The
printer operating conditions are described below. Use the printer under the following conditions.
Power supply voltage: 100–120 / 220–240 V AC
Power supply frequency: 50/60 Hz

Safety Precautions

                                                                                                                                                                                                 

iPF830

                                                                                                                                                                                                                     

User's Guide

 

 

Appendix

Safety Precautions

 

664

Summary of Contents for imagePROGRAF iPF830









































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePROGRAF iPF830

Oki Okipage8z Limited Warranty preview
Okipage8z
Brand: Oki Pages: 16
Olivetti PR2 plus Service Manual preview
PR2 plus
Brand: Olivetti Pages: 179
Olivetti JS-505 Service Manual preview
JS-505
Brand: Olivetti Pages: 36
Oki B6200 Series Maintenance Manual preview
B6200 Series
Brand: Oki Pages: 679
Oki PRO511DW Manual preview
PRO511DW
Brand: Oki Pages: 40
OKIDATA Pacemark 3410 Service Handbook preview
Pacemark 3410
Brand: OKIDATA Pages: 308
OKIDATA Pacemark 3410 Instruction Manual preview
Pacemark 3410
Brand: OKIDATA Pages: 9
OKIDATA MICROLINE 320 Quick Manual preview
MICROLINE 320
Brand: OKIDATA Pages: 2
Oki Microline 8480 FB Setup Manual preview
Microline 8480 FB
Brand: Oki Pages: 12
BIXOLON SRP-500 Command Manual preview
SRP-500
Brand: BIXOLON Pages: 29
Ricoh Infotec 4151 Operating Instructions Manual preview
Infotec 4151
Brand: Ricoh Pages: 60
Rokit EDISON S User Manual preview
EDISON S
Brand: Rokit Pages: 21
Ricoh P 501 Setup Manual preview
P 501
Brand: Ricoh Pages: 24
Gainscha GA-S300 User Manual preview
GA-S300
Brand: Gainscha Pages: 12
idp SMART-30S User Manual preview
SMART-30S
Brand: idp Pages: 88
Xerox N2125N - DocuPrint B/W Laser Printer Service Manual preview
N2125N - DocuPrint B/W Laser Printer
Brand: Xerox Pages: 335
Fuji Xerox apeosport-v c5585 User Manual preview
apeosport-v c5585
Brand: Fuji Xerox Pages: 493
Intermec 681T Specifications preview
681T
Brand: Intermec Pages: 2

Brands by name

Popular brands

Load more brands