Note
•
If you hold down
▲
or
▼
for less than a second, the roll will move about 1 mm (0.04 in).
If you hold down
▲
or
▼
for more than a second, the roll will move until you release the button. Release the
button when the Display Screen indicates "
End of paper feed. Cannot feed paper more.
".
Keeping Track of the Amount of Roll Paper Left
Setting
ManageRemainRoll
to
On
in the
Paper Menu
of the Control Panel will print a barcode with text on the roll when
the roll is removed that identifies the type of paper and amount left. When
ManageRemainRoll
is
On
and you load rolls
with printed barcodes, the type of paper and amount left are automatically detected after rolls are loaded. The barcode will
be cut off after it has been read.
Important
•
If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.
Follow these steps to set
ManageRemainRoll
to
On
as follows.
1.
On the
Tab Selection screen
of the Control Panel, press
◀
or
▶
to select the Paper tab (
).
Note
•
If the
Tab Selection screen
is not displayed, press the
Menu
button.
2.
Press the
OK
button.
The
Paper Menu
is displayed.
3.
Press
▲
or
▼
to select
ManageRemainRoll
, and then press the
OK
button.
4.
Press
▲
or
▼
to select
On
, and then press the
OK
button.
Handling Paper
>
Handling rolls
>
iPF8300
Keeping Track of the Amount of Roll Paper Left
7
791
