• Auto(OtherPaper)
Use this mode with paper not in the Paper Reference Guide, or if
Auto(GenuinePpr)
does not eliminate banding.
(See "
Types of Paper
.")
→P.774
Important
•
Adjustment is not possible with
Auto(GenuinePpr)
and
Auto(OtherPaper)
when using highly transparent
media.
In this case, use
Manual
adjustment.
(See "
Manual Banding Adjustment (Adj. Quality)
.")
→P.859
Note
•
Use paper of the same type and size for adjustment as you will use for printing.
•
Always check the
Adj. Priority
values before using
Auto(GenuinePpr)
or
Auto(OtherPaper)
.
(See "
Selecting a Feed Amount Adjustment Method (Feed Priority)
.")
→P.856
•
If additional fine-tuning is necessary after
Auto(GenuinePpr)
and
Auto(OtherPaper)
, execute
Adj. Fine
Feed
.
(See "
Fine-Tuning the Paper Feed Amount (Adj. Fine Feed)
.")
→P.861
•
Use
Adjust Length
to ensure that lines in CAD drawings are printed at exactly the right length.
(See "
Adjusting Line Length (Adjust Length)
.")
→P.861
•
This may take some time, depending on the type of paper.
Items to Prepare
When Using Rolls
An unused roll at least 10 inches wide
When Using Sheets
Auto(GenuinePpr)
: One sheet of unused paper, A4/Letter size
Auto(OtherPaper)
: Two sheets of unused paper, A4/Letter size (or one sheet when using A2)
Perform adjustment as follows.
1.
Load the paper.
•
Attaching the Roll Holder to Rolls
→P.782
•
Loading Rolls in the Printer
→P.786
•
Loading Sheets in the Printer
→P.813
Important
•
Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
2.
On the
Tab Selection screen
of the Control Panel, press
◀
or
▶
to select the Settings/Adj. tab (
).
Note
•
If the
Tab Selection screen
is not displayed, press the
Menu
button.
Adjustments for Better Print Quality
>
Adjusting the feed amount
>
Automatic Banding Adjustment (Adj. Quality)
iPF8300S
7
858
Summary of Contents for imagePROGRAF iPF8300S
