Canon imagePROGRAF iPF9400 User Manual Download

Page: 369 / 964

Setting Item

Details

1 sec.

3 sec.

5 sec.

7 sec.

9 sec.

The next line is printed when the set time elapses after a line is printed.

* Increase the time according to the occurrence condition of bleeding or unevenness.

Roll Paper Margin for Safety

You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.

•

Near End Margin

Specify the length of the

Near End Margin

(the leading edge margin) of the roll, as needed.

Setting Item

Details

Printer Default

The setting of the control panel of the printer is applied.

5 mm (0.2 in)

The document is printed in the standard size.

* Select this when you do not have any problems in printing.

20 mm (0.8 in)

Select this when rubbing against the printhead occurs such as when using paper that tends to
curl.

Cut Speed

Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.

Setting Item

Details

Printer Default

The setting of the control panel of the printer is applied.

High Speed

When the

Standard

setting does not result in a clean cut surface, select this.

Standard

Select this when you do not have any problems in automatic cutting.

Low Speed

This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it
when using adhesive paper.

Automatic Cutting

Set whether to perform roll cutting automatically or print a cut line.
The following settings are available for automatic cutting.

Setting Item

Details

Printer Default

The setting of the control panel of the printer is applied.

None

After printing completes, the roll is not cut per page, and the next page of data is printed succes-
sively.

Print Cut Guideline

After printing completes, a line is printed per page, and the next page of data is printed succes-
sively.

Calibration Value

You can specify whether to apply the results of calibration performed on the printer to image processing.

Setting Item

Details

Printer Default

The setting of the control panel of the printer is applied.

Enabled

Print using the calibration results.

Disabled

Print without using the calibration results. Select this to avoid the changing of the color of images
during printing by color calibration.

iPF9400

Paper Detailed Settings Dialog Box (Mac OS X)

User's Guide

Mac OS X Software

Printer Driver

369

Summary of Contents for imagePROGRAF iPF9400





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePROGRAF iPF9400

Reviews:

Related manuals for imagePROGRAF iPF9400

Brands by name

Popular brands

Canon imagePROGRAF iPF9400, User Manual

Search results

Summary of Contents for imagePROGRAF iPF9400

Reviews:

Related manuals for imagePROGRAF iPF9400

Brands by name

Popular brands