Canon imagePROGRAF iPF9400 User Manual Download

Page: 883 / 964

If the paper is not visible, lift the Ejection Guide, remove
the Roll Holder, and clear the paper jam from below.

After removing the paper, make sure there are no other
scraps of paper in the printer, and then lower the Ejec-
tion Guide.

If the Carriage is on the left, move the Carriage to the
right until it stops.

Important

•

Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn
on the printer.

Lower the Release Lever and close the Top Cover.

Turn the printer on.

(See "Turning the Printer On and Off.")

→P.21

Roll paper cannot be inserted into the paper feed slot

Cause

Corrective Action

The roll paper is warped.

Straighten out curls and reload the roll.

Paper is jammed by the paper feed slot. Remove the jammed paper.

(See "Clearing Jammed Roll Paper.")

→P.878

(See "Clearing a Jammed Sheet.")

→P.881

iPF9400

Roll paper cannot be inserted into the paper feed slot

User's Guide

Troubleshooting

Problems Regarding Paper

883

Summary of Contents for imagePROGRAF iPF9400





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePROGRAF iPF9400

Reviews:

Related manuals for imagePROGRAF iPF9400

Brands by name

Popular brands

Canon imagePROGRAF iPF9400, User Manual

Search results

Summary of Contents for imagePROGRAF iPF9400

Reviews:

Related manuals for imagePROGRAF iPF9400

Brands by name

Popular brands