ICC Profile Matching
Carry out color matching using the ICC profile. Specify the input profile, printer profile and
matching method in detail, and select when printing. You can use the digital camera or scanner
ICC profile, or the ICC profile created using the profile creation tool.
ICM
Perform color matching on the host computer using the Windows ICM function. Select when
printing from an ICM function-compatible application.
Off
Print without performing color matching on the printer driver. Select this when performing color
matching using applications such as Adobe Photoshop, or printing using a profile creation tool or
color chart.
Important
• When setting not to use ICM in the application software,
ICC Profile Matching
and
ICM
of
Color Correction
do not function. There are also times when it does not print correctly.
Input Profile
Specifies the input profile to be used when you select
ICC Profile Matching
for
Color Correction
.
Printer Profile
Specifies the printer profile to be used when
ICC Profile Matching
is selected for
Color Correction
.
Normally
Auto
is selected but you can also select a printer profile manually.
Rendering Intent
Specifies the matching method to be used when you select
Driver Matching
,
ICC Profile Matching
,
or
ICM
, for
Color Correction
.
Perceptual (Photo) / Perceptual
Reproduces colors of general photos naturally and features smooth gradation. In addition,
selecting this setting allows you to adjust colors easily using an application software.
Saturation (Poster/CAD) / Saturation
Reproduces vivid colors on data such as a poster. In addition, prints in easy-to-see colors
suitable for line drawing.
Relative Colorimetric
When image data is converted to the color space of the printer, this method converts the image
data so the color reproduction approximates the shared color regions. Select this method to print
image data with colors that are close to the original colors.
The white spots are reproduced as white spots (background color) on the paper.
Absolute Colorimetric
This method uses the white spot definitions in the input and output ICC profiles to convert the
image data.
Although the color and color balance of the white spots change, you may not be able to get the
desired output results because of the profile combination.
Important
• Depending on the media type, you may obtain the same print results even when you change the
Rendering Intent
setting.
• If
Driver Matching
is selected for
Color Correction
, then
Relative Colorimetric
and
Absolute
Colorimetric
are not displayed.
719
Summary of Contents for imagePROGRAF TX-2100
