xxx
Wh
at Can I D
o
with
This Ma
chine?
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile
Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 14, “Appendix,” for
specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the
telephone company. If the RJ11-C wall jack is not present, telephone/facsimile
operation is not possible.
3. Order a normal business line from your telephone company’s business representative.
The line should be a regular voice grade line or an equivalent one. Use one line per
unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2,500 (touch-tone) or 500
(rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch eXchange) unit
without “Call Waiting” can be used with your facsimile unit. Key telephone systems are not
recommended because they send nonstandard signals to individual telephones for ringing and
special codes, which may cause a facsimile error.
Summary of Contents for imageRUNNER 1019 Series
