5-3
5
T
rou
bles
ho
ot
ing
Printout is wrong
There is a communications
problem between the printer
and your computer.
- Make sure that your cable connections
are secure.
- Make sure that your parallel interface
cable is less than 9.9 feet (3.0 m) or
USB interface cable is less than 16.5
feet (5.0 m) long.
- Make sure that you are not using a
switch box.
- Check that you have selected the correct
printer driver in Windows.
The wrong printer is selected
in the Printers folder.
Make sure that the
Canon iR1510-1670
is
selected in the
Printers
(in Windows XP/
Server 2003,
Printers and Faxes
) folder.
You might need to modify
your BIOS setup.
See your computer’s documentation for
details. Try changing the parallel port
mode or the parallel port address to see if
this solves the problem.
Printer locks up
system
Your system setup has a
problem.
- Verify that you have a high-quality
shielded interface cable.
- The problem might be your BIOS.
Verify that your BIOS setup is correct.
(See your computer’s documentation
for details.)
- Verify that your physical memory is
working correctly.
- If you have a Toshiba laptop, change
this line in your CONFIG.SYS file:
c:\winutils\mxtime.exe
to:
REM c:\winutils\mxtime.exe
Computer
indicates a device
time-out
Your computer is sending
data to the printer but the
printer is not responding.
The printer might be off,
offline, or not connected to
the computer.
- Make sure that the printer is not paused.
- Check that the printer’s interface cable
is securely connected to both the printer
and the computer.
- Make sure that paper is properly loaded
in the paper source.
- Reset the printer and computer.
- Try the print operation again.
- Try a different cable.
Problem
Cause
Solution
Summary of Contents for IMAGERUNNER 1670F
