Canon imageRunner 2004 User Manual Download

Page: 387 / 652

Changing Port Numbers (imageRUNNER 2204F / 2204N /
2004N)

1053-061

Ports serve as endpoints for communicating with other devices. Typically, conventional port numbers are used for

major protocols, but devices that use these port numbers are vulnerable to attacks because these port numbers are

well-known. To enhance security, your Network Administrator may change the port numbers. When a port number has

been changed, the new number must be shared with the communicating devices, such as computers and servers.

Specify the port number settings depending on the network environment.

To change the port number for proxy server, Setting a Proxy (imageRUNNER 2204F / 2204N / 2004N)
(P. 381) .

Tap <Menu> in the Home Screen.

Tap <Network Settings>.

●

If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap
<Apply>, and press

. Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)(P. 359)

Select <TCP/IP Settings> <Port Number Settings>.

Tap the port to change.

Learning more about the ports

●

<LPD>/<RAW>/<WSD Multicast Discovery> Configuring Printing Protocols and WSD Functions(P. 330)

●

<HTTP> Disabling HTTP Communication (imageRUNNER 2204F / 2204N / 2004N)(P. 394)

●

<SNMP> Monitoring and Controlling the Machine with SNMP(P. 349)

Enter the port number using the numeric keys, and tap <Apply>.

Security

379

Summary of Contents for imageRunner 2004













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRunner 2004

Reviews:

Related manuals for imageRunner 2004

Brands by name

Popular brands

Canon imageRunner 2004, User Manual

Search results

Summary of Contents for imageRunner 2004

Reviews:

Related manuals for imageRunner 2004

Brands by name

Popular brands