Bit
Function
1
0
3
not used
-
-
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
not used
-
-
Detailed Discussions of Bit 0
For reception, the absence of the carrier between DCS and TCF may be detected.
If the machine returns FTT while the other party (PC-FAX in particular) is sending TCF to cause a reception error, be sure to set
the bit to ‘1’.
If the error still occurs, set bit 1 of #1 SSSW SW18 to ‘1’.
This function is valid only when the machine uses an R288F modem.
Detailed Discussions of Bit 1
For reception, the length of time during which the absence of the carrier is detected between DCS and TCF may be set.
This bit is valid when ‘1’ is set to bit 0 of #1 SSSW SW18.
Detailed Discussions of Bit 2
You can change the parameter relating to communication control for IP network (SSSW-SW02 bit4) to the existing control in a
batch process.
The parameter value is handled as a fixed value.
● SSSW-SW22
List of Functions
Bit
Function
1
0
0
To disable NSX transmission.
Yes
No
1
not used
-
-
2
not used
-
-
3
Prohibit manual polling
Yes
No
4
not used
-
-
5
not used
-
-
6
not used
-
-
7
not used
-
-
Detailed Discussions of Bit 0
Nonstandard protocol (own company mode) can be disabled.
Detailed Discussions of Bit 3
Selects whether to prohibit by manual polling (off hook key + start key).
● SSSW-SW25
List of Functions
Bit
Function
1
0
0
Transmission telephone numbers displayed on
reports from CSI
Other fax number
Called number
1
not used
-
-
2
If void CSI has been received, handle as non-
received CSI.
Yes
No
3
Menu display of message language
Display
Do not display
4
not used
-
-
5
not used
-
-
6
not used
-
-
8. Service Mode
232
Summary of Contents for imageRUNNER 2525 Series
