Useful Copy Functions
3–39
Recalling a Pre
vious Cop
y Job (RECALL)
Recalling a Previous Copy Job
(RECALL)
You can recall up to three previously set copy jobs and make copies using these settings.
NOTICE
●
One copy job is defined by setting the number of copies, exposure, zoom etc. and pressing the
Start
or
Reset
key when the auto-clear function is on, or by calling up a copy job stored in memory. If one of these keys
was not pressed, or if the auto-clear function is not active, calling up a copy job by pressing [REC.] is not
possible.
●
Once stored, the three copy jobs are held in memory even if the power is turned OFF.
●
The Standard mode or Additional Function settings are not stored.
For example, when the Photo mode is set to "ON" in the custom copy settings, the Photo mode cannot be
recalled using the Recall mode.
Place your originals and press the [SPECIAL
FEATURES] key.
1
Press the [REC.] key.
2
Select one of the [1BEFORE], [2BEFORE]
or [3BEFORE] keys. Check that the copy
settings are correct before pressing the
[OK] key.
The display returns to the Special Features screen.
3
MEMO
●
You can also check which copy jobs are stored to
memory other than the currently displayed copy
job by pressing the [
▲
] or [
▼
] key.
Press the [DONE] key.
The display returns to the Basic Features screen.
4
Proceed to make copies in the usual
way.
5
