3
Setting Specifications That Are Common to Each Function (Common Settings)
3-11
Selecting and Stor
ing Settings to Suit y
our Needs
Setting Entry Tone, Error Tone, and Job Done Tone
You can select whether or not to sound audible tones. The following tones sound at the
following times:
•
Entry Tone: When pressing keys on the control panel or keys on the touch panel display.
•
Error Tone: When a malfunction occurs (e.g., paper jam or operational error).
•
Job Done Tone: After the job has been completed (output, stapled, stored in a Mail Box or
faxed).
NOTE
•
The default setting is “On” for all tones.
•
The volume of the job done tone after fax transmission can be adjusted by the volume control in the
Fax settings screen (
→
Facsimile Guide).
1
Call up the desired screen as follows:
2
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone,
and press “OK.”
3
Press “Done.”
Repeat this procedure.
The speci
fi
ed mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Audible Tones
