7
Envelope Feeder Attachment-B1
7-21
Handling Options
Load the envelopes in the direction shown below.
Align the leading edges of the envelopes, and make sure that they are held in place under
the claw.
IMPORTANT
•
If any envelopes are curled, flatten them out before placing them in the envelope cassette.
•
When the Saddle Finisher-G1 is attached, print by setting the Image Orientation Priority to
“Off” in the Additional Functions screen.
•
Do not allow the number of envelopes (height) loaded in the cassette to fall below the height
limit mark (
).
•
The maximum height (quantity) of envelopes that can be loaded in the cassette is about 1-1/
4" (30 mm).
•
Though the maximum height (quantity) of envelopes varies according to the envelope type
and user operating conditions, 1-1/4" (30 mm) is about 50 envelopes.
Front Side
