1
Placing Originals
1-41
Bef
ore
Y
ou Star
t Using
This Machine
Orientation of Originals
You can place original either vertically or horizontally. Always align the top edge of your
original with the back edge of the platen glass (top left corner) or the feeder.
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass, prints may not
be made correctly, depending on the mode you have set.
•
LTR and STMT-size originals can be placed either vertically or horizontally. However, the scanning
speed for horizontally placed originals is somewhat slower than for vertically placed originals. You
can place originals horizontally when printing with Preset Zoom mode, such as when processing
LTR
→
11" x 17".
•
Horizontally placed LTR and STMT-size originals are referred to as LTRR and STMTR.
•
11" x 17" and LGL-size originals must be placed horizontally.
[Platen glass]
[Feeder]
Horizontal placement
Vertical placement
Horizontal placement
Vertical placement
