33
Control Panel Parts and Functions
Quick Menu key
Numeric keys
Press to enter numerical values.
Touch Panel Display
Main Menu key
USB Port
Settings/Registration key
Press to specify settings/registration.
5
4
3
2
1
7
6
Counter Check key
Volume Settings Key
Status Monitor/Cancel key
Brightness Adjustment Dial
11
12
15
14
13
10
9
20
19
18
17
16
8
Edit Pen
10
Start key
Press to start an operation.
12
Clear key
Press to clear entered values or characters.
9
Reset key
Press to restore the standard settings of the machine.
16
The settings screen for each function is shown on this display.
Eight function keys are displayed by default.
Use to adjust the brightness of the touch panel
display.
Press to adjust the fax sending/receiving alarm volume,
transmission volume, and other settings.
Press to display the copy and print count totals
on the touch panel display.
Processing/Data Indicator
15
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax
data is stored in memory.
ID (Log In/Out) key
17
Stop key
11
Press to stop a job in progress.
Use when operating the touch panel display, such as to
enter characters.
Main Power Indicator
13
Lights when the main power is turned ON.
Error Indicator
14
Flashes or lights if there is an error in the machine.
Press to set or cancel the Sleep mode.
For information on the Auto Sleep mode, see
"Control Panel Power Switch."
Press to display functions registered in the Quick
Menu.
Press to display the Main Menu screen.
Use each function by selecting it from the Main Menu screen.
Use to connect memory media to the machine via
USB.
Control Panel Power Switch
(Sub Power Supply)
Press to log in/out of the machine when a login
service is set.
Press to check the status of jobs or to cancel print jobs.
Also, you can check the status of the machine such as
the amount of paper remaining in the paper source.
