Connecting the Machine to a Computer or Network
2-4
2
Settings Common to the Netw
o
rk
Protocols
Connecting to a Network
The machine supports TCP/IP, AppleTalk, and NetWare, which enables it to be
used by Windows, Macintosh, UNIX, and Linux computers. It also has a 10Base-T/
100Base-TX connector that can be used on most LANs.
Using Ethernet
Connect the machine's RJ-45 connector to a hub port using a Category 5 twisted
pair LAN cable.
IMPORTANT
•
You cannot use the machine as a repeater, bridge, or gateway.
•
If two or more machines are on an AppleTalk network, they should be switched 'on' 10
seconds or more apart.
Hub
Ethernet Cable
PC with
100Base-TX Connector
PC with
10Base-T Connector
E210_NWG_US.book Page 4 Wednesday, August 18, 2004 3:40 PM