Protocol Settings
3-4
3
Using a
TCP/IP Netw
o
rk
Settings from the Control Panel
The following are the procedures for specifying the settings from the control panel.
IMPORTANT
Settings specified from the control panel become effective after the machine is restarted,
after the procedure.
NOTE
For instructions on how to enter characters using the touch panel display, see Chapter 2,
"Basic Operations," in the
Reference Guide
.
TCP/IP Settings
NOTE
•
If only the optional Multi-PDL Printer Kit, the optional Super G3 FAX Board, or the
optional Super G3 Multi-Line FAX Board is installed, set the following items:
- [LPD Settings] (See step 13.)
- [RAW Settings] (See step 14.)
- [IPP Settings] (See step 18.)
1
Press
(Additional Functions).
2
Press [System Settings].
E210_NWG_US.book Page 4 Wednesday, August 18, 2004 3:40 PM