Clearing Staple Jams
8-76
8
T
rou
b
lesh
o
o
ti
ng
Clearing Staple Jams
If a staple jam occurs, follow the procedure described below to remove the jammed
staples.
Finisher-AD1/Saddle Finisher-AD2 (Optional)
If a staple jam occurs in the stapler unit of the optional Finisher-AD1 or optional
Saddle Finisher-AD2, a screen similar to the one shown below appears on the
touch panel display. Check the location of the staple jam, and follow the procedure
described below, and the procedure that appears on the touch panel display, to
remove any jammed staples.
IMPORTANT
Make sure to close all covers and drawers of the machine before clearing any staple
jams.
1
Open the front cover of the finisher.
The Optional Saddle Finisher-AD2
The Optional Finisher-AD1
Summary of Contents for ImageRunner 5050
