Clearing Staple Jams
8-79
8
T
rou
b
lesh
o
o
ti
ng
Saddle Stitcher Unit (Optional)
If a staple jam occurs inside the saddle stitcher unit of the optional Saddle
Finisher-AD2, a screen similar to the one shown below appears on the touch panel
display. Check the location of the staple jam, and follow the procedure described
below, and the procedure that appears on the touch panel display, to remove any
jammed staples.
IMPORTANT
•
If necessary, make sure to remove all of the paper in the Booklet tray before clearing a
staple jam inside the saddle stitcher unit.
•
Make sure to close all covers and drawers of the machine before clearing any staple
jams.
•
This procedure is necessary only if the optional Saddle Finisher-AD2 is attached.
1
Open the front cover of the finisher.
Summary of Contents for ImageRunner 5050
