Copy Guide – iR ADV
Page
9
of
43
2. General Copying Features
2.1. Reducing/Enlarging
You can selectthe machine to adjustthe copy zoom ratio automatically, oryou can specify the copy zoom
ratio.
1. Press the
Copy Ratio
button on the main copier screen for Reducing/Enlarging.
2.
You have pre-set enlarging on the
right hand side and pre-set reduction on the left hand side. If you have an A4 original and you would like to
enlarge to A3 please make sure your original is placed in the documentfeeder in the Landscape direction
(A4R) and push the slide guides in to fit. If using the platen glass please place face down, again in the
A4R direction.
3. Make you selection i.e. A4 to A3
4. Press ok and the green start button to make a copy.
2.2. Finishing - Collating into sets & Stapling
When you place your originals in the document feeder these will automatically be collated into sets. Copy
sets are collated in various ways depending on the machine configuration (optional accessories).
1. Place originals in document feeder.
2. Press the Finisher button.
3. Select the desired option - Collate/Group/Staple.
