142
Saddle Stitcher Unit of the Booklet Finisher-G1
Check the location of the staple jam, and follow the procedure described below, while referring to the directions that appear on
the touch panel display, to remove the jammed staple.
• Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
• Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.
The Booklet Finisher-G1 is an optional product.
1
Open the front cover of the fi nisher.
2
Pull out the saddle stitcher unit.
2
1
*2
*1
*1 Stapler Unit of the Saddle Stitcher Unit
*2 Saddle Stitcher Unit
1. Grip the handle of the
saddle stitcher unit, and
pull out until it stops.
2. Pull the stapler unit of
the saddle stitcher unit
towards you, and then
push it up.
Summary of Contents for imageRUNNER ADVANCE 4225
