Item
Function/method
Protective Function
"Main thermistor and Sub thermistors (front)/(rear)
Thermo Switch (operating temperature: 250 deg C)"
*1. Target temperature is specified depending on the process speed, the fixing mode and the fixing temperature at the start of
warm-up control.
■ Major parts configuration
Film Unit
Pressure Roller
Fixing Outlet Sensor
(S19)
Fixing Heater
(H1, H2)
Thermoswitch
(TP1)
Fixing Pressure
Release Sensor
(S53)
Fixing Main
Thermistor
(TH1)
Fixing Sub
Thermistor 1
(TH2)
Fixing Sub
Thermistor 2
(TH3)
Symbol
Part name
Function / method
-
Film unit
Applying heat and pressure makes the toner image on paper fixed
(fused).
-
Pressure roller
H1/H2
Fixing heater
Ceramic heater
TH1
Main thermistor
To be in contact with the heater
Temperature control, detection of abnormal temperature rise
TH2
Sub thermistor (front)
To be in contact with the heater (non-feeding area)
Temperature control, detection of abnormal temperature rise, tem-
perature detection/cooling control on the edges
TH3
Sub thermistor (rear)
To be in contact with the heater (non-feeding area)
Temperature control, detection of abnormal temperature rise, tem-
perature detection/cooling control on the edges
TP1
Thermo Switch
Non-contact type with the heater
To block AC electric power supply when a failure is detected.
S19
Fixing outlet sensor
Jam detection
S53
Fixing Pressure Release Sensor
Detect the engagement/disengagement status of the Film Unit
2. Technology
104
Summary of Contents for imagerunner advance 4551i
