Protection features
Code
Detail
Title
Description
Error Clear
E000
0001
Fixing temperature
abnormal rise
The temperature detected by the main thermistor does not rise to the speci-
fied value during startup control.
Yes
E001
0000
Fixing unit tempera-
ture rise detection
The reading of the main thermistor is 250 deg C or more continuously for 200
msec.
Yes
0001
The hardware circuit detects overheating of the main or sub thermistor for
200 msec.
Yes
0002
The reading of the sub thermistor is 295 deg C or more continuously for 200
msec.
Yes
E002
0000
Fixing unit tempera-
ture insufficient rise
1. The reading of the main thermistor is less than 115 deg C continuously
for 400 msec 1.3 sec after it has indicated 100 deg C.
2. The reading of the main thermistor is less than 150 deg C continuously
for 400 msec 1.3 sec after it has indicated 140 deg C.
Yes
E003
0000
Low fixing tempera-
ture detection after
standby
The reading of the main thermistor is less than 140 deg C continuously for
400 msec or more.
Yes
E004
0000
Thermistor discon-
nection detection er-
ror
When disconnection is detected with connector (J214) for 30 sec continu-
ously.
No
E009
0000
Fixing pressure/pres-
sure release error
detection
When the Fixing Pressure Release Sensor never detected pressure for 1.5
sec.
No
0001
When the Fixing Pressure Release Sensor never detected pressure release
for 1.5 sec.
No
E014
0001
Unstable rotation of
the Fixing Motor (M2)
Detection is executed every 100 msec after the start of motor rotation; how-
ever, the drive detection signal is absent for 2 sec.
No
0002
During motor rotation, detection is executed every 100 msec; however, the
drive signal is absent 5 times in sequence.
No
E261
0000
Error in Zero Cross
Zero Cross failed to be detected for 500ms or more while the relay was ON.
* The same condition is detected after the error retry is performed.
No
Related Service Mode
• Error code clear
COPIER > FUNCTION > CLEAR > ERR
2. Technology
113
Summary of Contents for imagerunner advance 4551i
