![background image](http://html1.mh-extra.com/html/canon/imagerunner-advance-4551i/imagerunner-advance-4551i_service-manual_4280156520.webp)
840-0003-05
Failure of Fixing Film Edge Cooling Fan (Front) (FM2)
Detection Description
When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) stops.
* The same status is detected again after the retry operation.
Remedy
[Related parts]
- Harness connecting from the DC Controller PCB (UN2/J334) to the Fixing Film Cooling Fan
(Front) (FM2/J733)
- Fixing Film Cooling Fan (Front) (FM2)
- DC Controller PCB (UN2)
[Remedy]
1.Check/replace the related harness/cable, connector and parts.
2.Replace the DC Controller PCB.
[Reference]
Before replacing the DC Controller PCB, back up the service mode data and restore the backup
data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
840-0004-05
Rotation error of Fixing Film Edge Cooling Fan (Front) (FM2)
Detection Description
When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) operates.
* The same status is detected again after the retry operation.
Remedy
[Related parts]
- Harness connecting from the DC Controller PCB (UN2/J334) to the Fixing Film Cooling Fan
(Front) (FM2/J733)
- Fixing Film Cooling Fan (Front) (FM2)
- DC Controller PCB (UN2)
[Remedy]
1.Check/replace the related harness/cable, connector and parts.
2.Replace the DC Controller PCB.
[Reference]
Before replacing the DC Controller PCB, back up the service mode data and restore the backup
data after the replacement so the data may be able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
880-0001-00
Controller Fan error
Detection Description
It was detected that the Controller Fan was locked.
Remedy
[Related parts] R1.00
- Cable between the Main Controller PCB (UN25/J15) and the Controller Fan (FM12)
- Controller Fan (FM12)
- Main Controller PCB (UN25)
[Remedy] Perform the following in the order while checking whether the error is cleared.
- Check the connectors of the Controller Fan.
- Visually check rotation of the Controller Fan.
a. If it is not rotated, replace the Controller Fan.
b. If it is rotated, replace the Main Controller PCB.
880-0003-00
Controller Fan error
Detection Description
It was detected that the Controller Fan was locked.
Remedy
[Related parts] R1.00
- Cable between the Main Controller PCB and the Controller Fan
- Controller Fan
- Main Controller PCB
[Remedy] Perform the following in the order while checking whether the error is cleared.
- Check the connectors of the Controller Fan.
- Visually check rotation of the Controller Fan.
a. If it is not rotated, replace the Controller Fan.
b. If it is rotated, replace the Main Controller PCB.
7. Error/Jam/Alarm
507
Summary of Contents for imagerunner advance 4551i
