COPIER > FUNCTION > PART-CHK
MTR-ON
1
Operation check of Motor
Detail
To start operation check of the Motor specified by MTR.
The operation automatically stops after operation of 30 seconds.
Use Case
When replacing the Motor/checking the operation
Adj/Set/Operate Method
Select the item, and then press OK key.
Caution
- Be sure to remove the Toner Container before Bottle motor (M17) is activated. If it remains to be
installed, toner is supplied.
- When Toner feed motor (M21) is activated, Main motor (M1) and Developing Clutch (CL1) is
activated too.
- Be sure to open the cassette before Deck pickup motor of the paper deck unit is activated. If the
motor is activated with the cassette closed, the paper may be picked up.
- Be sure to open the cassette before High capacity cassette shift motor of the high capacity
cassette feeding unit is activated. If the motor is activated with the cassette closed, it may be
damaged.
- Be sure to open the cassette before High capacity cassette pickup motor of the high capacity
cassette feeding unit is activated. If the motor is activated with the cassette closed, the paper may
be picked up.
Display/Adj/Set Range
During operation: ACTIVE, When operation finished normally: OK!
Required Time
1 min
Related Service Mode
COPIER> FUNCTION> PART-CHK> MTR
SL
1
Specification of operation Solenoid
Detail
To specify the Solenoid to operate.
Use Case
When replacing the Solenoid/checking the operation
Adj/Set/Operate Method
Enter the value, and then press OK key.
Display/Adj/Set Range
1 to 10
1: Cassette 1 pickup solenoid (SL1)
2: Cassette 2 pickup solenoid (SL11)
3: Cassette 3 pickup solenoid (SL101)
4: Cassette 4 pickup solenoid (SL102)
5: Deck Pickup Release Solenoid (SL1)
6: Compartment Open Solenoid (SL2)
7: Reversal Solenoid (SL12)
8: No. 2 Delivery Solenoid (SL13)
9: Not used
10: Multi-Purpose Tray Pickup Solenoid (SL2)
Default Value
1
Related Service Mode
COPIER> FUNCTION> PART-CHK> SL-ON
SL-ON
1
Operation check of Solenoid
Detail
To start operation check for the Solenoid specified by SL.
The operation stops after "ON for 0.5 sec" => "OFF for 5 sec" => "ON for 0.5 sec" => "OFF for 5
sec" => "ON for 0.5 sec".
Use Case
When replacing the Solenoid/checking the operation
Adj/Set/Operate Method
Select the item, and then press OK key.
Display/Adj/Set Range
During operation: ACTIVE, When operation finished normally: OK!
Required Time
12 sec
Related Service Mode
COPIER> FUNCTION> PART-CHK> SL
8. Service Mode
701
Summary of Contents for imagerunner advance 4551i
