COPIER > OPTION > DSPLY-SW
T-LW-BK
1
Set toner level warning mssg dspl timing
Detail
To set the threshold value for the toner level in the Toner Container.
When the toner level becomes below the threshold value while TNR-WARN is 0, a toner level
warning message "Toner is low. Replacement not yet needed." is displayed on the Control Panel.
As the value is incremented by 1, the threshold value is increased by 1%. As the value is larger,
the timing to display the message becomes earlier.
Use Case
When changing the timing to display the toner level warning message for the user to whom toner
is not delivered automatically
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 40
Unit
%
Default Value
JP:15, USA:15, EUR:0, AU:15, CN:15, KR:15, TW:15, ASIA:15, LTN:15
Related Service Mode
COPIER> OPTION> DSPLY-SW> TNR-WARN
Supplement/Memo
It is not linked with COPIER> OPTION> FNC-SW> T-DLV-BK.
Amount of Change per
Unit
1
SND-NAME
1
Setting of [Scan and Send] button name
Detail
To set the name of [Scan and Send] button displayed in the main menu.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: [Scan and Send], 1: [Scan], 2: [Scan]
Default Value
0
PCMP-DSP
1
Set copy cmpl scrn dspl:chg w/devc alone
Detail
To set whether to display the screen indicating completion of copying at the time of charging with
a device alone.
When 0 is set, a message "Copying is complete. Do you want to start the job again with the same
settings?" is not displayed in a pop-up screen.
When COIN is 4, this setting is enabled.
Use Case
Upon user's request
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
1
Related Service Mode
COPIER> OPTION> ACC> COIN
■ NETWORK
COPIER > OPTION > NETWORK
RAW-DATA
2
Setting of received data print mode
Detail
To set print mode for the received image data.
This item is used to identify the cause whether it's due to image data or image processing in the
case of trouble with received image.
Use Case
When received image trouble occurs
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to set the value back to "0: Normal print operation" after recovering from the trouble.
Display/Adj/Set Range
0 to 1
0: Normal print operation, 1: Print with original data without image processing
Default Value
0
8. Service Mode
734
Summary of Contents for imagerunner advance 4551i
