COPIER > OPTION > NETWORK
SSLMODE
2
Setting of HTTP/HTTPS port open/close
Detail
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to open or close HTTP/HTTPS port.
When 1 is set while [Use HTTP] is ON and [SSL Settings] is OFF in Settings/Registration menu,
HTTP port is opened whereas HTTPS port is closed.
When 2 is set while both [Use HTTP] and [SSL Settings] are ON in Settings/Registration menu,
HTTP port is closed whereas HTTPS port is opened.
Use Case
When limiting the port to open because of security concern
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 2
0: Normal, 1: Open HTTP port (80/8000) only, 2: Open HTTPS port (443/8443) only
Default Value
0
Additional Functions
Mode
Preferences> Network> TCP/IP Settings> Use HTTP
Management Settings> License/Other> MEAP Settings> SSL Settings
SSLSTRNG
2
Allow weak encryption algorithm for SSL
Detail
To set whether to allow using weak encryption algorithm for SSL.
When 1 is set, weak encryption algorithm cannot be used.
Use Case
When prohibiting weak encryption algorithm because of security concern
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Normal mode, 1: Secure mode ( Not used TLS_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_
RC4_128_MD5)
Default Value
1
NW-WAIT
2
Set connect wait at deep sleep recovery
Detail
To set whether to send wakeup notice after the time set in Settings/Registration menu has elapsed
when recovering from deep sleep.
When 0 is set, wakeup notice is sent after "Waiting Time for Connection at Startup" has elapsed.
When 1 is set, wakeup notice is sent when the machine becomes ready for communication.
Use Case
When a failure of the device management tool occurs
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Wait, 1: Not wait
Default Value
0
Additional Functions
Mode
Preferences> Network> Waiting Time for Connection at Startup
WLAN-USE
2
Setting of wireless LAN invalidation
Detail
To set whether to disable the wireless LAN.
Bringing in and installation of the wireless LAN equipment may be prohibited depending on user.
In such case, set 0 to prevent the wireless LAN to be used. When 0 is set, [Wireless Connection
Settings] is not displayed in [Settings/Registration].
Use Case
When bringing in and installation of the wireless LAN equipment is prohibited
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Disabled, 1: Enabled
Default Value
1
Additional Functions
Mode
Preferences> Network> Wireless Connection Settings
8. Service Mode
746
Summary of Contents for imagerunner advance 4551i
