![background image](http://html1.mh-extra.com/html/canon/imagerunner-advance-4551i/imagerunner-advance-4551i_service-manual_4280156807.webp)
COPIER > OPTION > ACC
MIN-PRC
1
Set of Coin Manager minimum price
Detail
To set the minimum amount to be handled with Coin Manager.
Enter 10 when specifying 10 Japanese yen as the minimum amount to be handled with the Coin
Manager that supports Japanese yen.
In the case to specify 1 to 4 (Euro/Pound/Swiss Franc/Dollar) by going through the following:
COPIER> OPTION> ACC > UNIT-PRC, entry is in fractional unit. Entry of 50 indicates 50 cents
($ 0.50).
Use Case
At installation of Coin Manager
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
Display/Adj/Set Range
0 to 9999
Default Value
10
Related Service Mode
COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/Memo
When a value smaller than the minimum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
MAX-PRC
1
Set of Coin Manager maximum price
Detail
To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum amount to be handled with the
Coin Manager that supports Japanese yen.
Use Case
At installation of Coin Manager
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
Display/Adj/Set Range
0 to 9999
Default Value
8800
Related Service Mode
COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/Memo
When a value larger than the maximum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
MIC-TUN
1
Manual adj of voice recognize microphone
Detail
To manually adjust the voice receiving level (sensitivity) of the connected voice recognition
microphone.
Microphone sensitivity is automatically tuned in Settings/Registration menu; however, adjust it
manually as needed.
Use Case
When the sensitivity of microphone is not improved by auto tuning
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 255
Default Value
128
Additional Functions
Mode
Preferences> Accessibility> Voice Navigation Settings> Tune Microphone
8. Service Mode
794
Summary of Contents for imagerunner advance 4551i
