SORTER > OPTION
FR-ST-PO
1
Set staple free staple position: Fin-J1
Detail
To set the staple position of staple free stapling.
When 1 is set, staple position becomes the center so paper is more likely to be come off. The
staple position moves to the delivery direction for 4.0 mm and the alignment direction for 2.0 mm
inside.
Use Case
Upon user's request
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: Corner-stapling (normal), 1: Center-stapling
Default Value
0
Related Service Mode
SORTER> ADJUST >FR-STP-X, FR-STP-Y
MSTP-WT
1
Set wait time after manual stpl: Fin-J1
Detail
To set the duration of time to keep manual staple mode enabled after execution of manual stapling.
While manual stapling mode is enabled, other jobs are not accepted.
Use Case
Upon user's request
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 10
Unit
sec
Default Value
0
Amount of Change per
Unit
1
TRY-PSTN
1
Set tray pstn after job complete: Fin-J1
Detail
To set the tray position after the completion of job.
When 1 is set, the tray stops at the lower limit position. Visibility of the delivered papers is improved,
but FCOT becomes longer.
Use Case
Upon user's request (to improve visibility of the delivered papers)
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
When 1 is set, FCOT becomes longer.
Display/Adj/Set Range
0 to 1
0: Normal (priority on productivity), 1: Lower limit position (priority on visibility)
Default Value
0
Related Service Mode
SORTER> OPTION> TRY-STP
Supplement/Memo
When 1 in SORTER> OPTION> TRY-STP is set, the tray of the inner finisher does not down after
paper full detection.
PUN-Y-SW
1
Set of punch horz reg oprtn: Fin-J1/Y1
Detail
To set whether or not to perform the horizontal registration operation of puncher unit for matching
with the center of the paper.
Use Case
When the adjustable range of the punch hole horizontal registration adjustment (PNCH-Y) is
enlarged.
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
Fin-Y1
When a punch hole position precision improvement mode were set, this mode is given priority to.
Display/Adj/Set Range
0: The horizontal registration operation is performed.
1: The horizontal registration operation is not performed. (fixed in the center position)
Default Value
0
Related Service Mode
SORTER> ADJUST> PNCH-Y, SORTER> OPTION> PUCH-SW, SORTER> OPTION> PNCH-
SW3 (Fin-Y1 Only)
Additional Functions
Mode
Fin-Y1
Adjustment/Maintenance> Adjust Action> Switch Finisher Puncher Mode
8. Service Mode
868
Summary of Contents for imagerunner advance 4551i
