■ Lead-edge Margin(L1) Adjustment
(2nd side)
NOTE:
By executing the L1 adjustment (2nd side) for the Cassette
1, the adjustment is applied to all source of paper.
Execute duplex printing from the Cassette 1, and check that
the left edge margin is within L1=2.5+/- 2.0mm. If it is not
within the range, execute adjustment by following the
procedure below.
L
1
Feeding direction
of paper
image
1. Adjust the image position on the service mode.
• Service mode (Level 1) > COPIER > ADJUST >
FEED-ADJ > ADJ-REFE
NOTE:
< Setting Range >
-128 to 127 (0.1mm per unit)
As the value is increased by 1, the L1 is increased by
0.1mm.
2. Write the replaced adjustment value on the service
label.
3. Exit the service mode.
4. Execute duplex printing from the Cassette 1, and
check that the left edge margin is within L1=2.5+/-
2.0mm.
■ Leading Edge Margin (L1)
Adjustment (1st side / 2nd side)
NOTE:
By executing the leading edge margin adjustment for the
Cassette 1, the adjustment is applied to all source of
paper.
Execute duplex printing from the Cassette 1. Check that the
L1 is within 4.0+1.5mm/-1.0mm. If it is not within the range,
execute adjustment by following the procedure below.
image
L1
Feeding direction
of paper
1. Adjust the image position in the service mode.
• Service mode (Level 1) > COPIER > ADJUST >
FEED-ADJ > REGIST
NOTE:
< Setting Range>
-128 to 127 (0.1mm per unit)
As the value is incremented by 1, the L1 is increased by
0.1mm.
2. In case that the setting value is changed at step 1),
write the replaced setting value on the service label.
3. Exit the service mode.
4. Execute duplex printing from the Cassette 1. Check
that the L1 is within L1=4.0 +1.5mm/-1.0mm.
Checking Network Connection
■ Overview
If the user network environment is TCP/IP, use Ping function
to check that the network setting is properly executed.
If the user network environment is IPX/SPX or Apple Talk,
skip this procedure.
9. Installation
901
Summary of Contents for imagerunner advance 4551i
