24
Output Results
Q
21
The printed paper is warped.
A
If you print an original with many images or an original with a high image density,
the paper may become warped. To reduce the warping, try the following.
●
Use heavy paper:
If you are using thin paper, try changing to with a weight of approximately 20 lb bond (80 g/m
2
).
●
Use paper with a low moisture content:
When you remove paper from its packaging, load it into the paper source immediately. When there is
paper remaining in the packaging after you have loaded the paper, store it with the packaging closed
properly to prevent the paper from absorbing moisture.
•
For information on loading paper, see e-Manual > Maintenance.
