36
A
pp
en
dix
Appendix
•
Do not remove the machine's leveling
feet after the machine has been
installed, as this may cause the machine
to fall or tip over, resulting in personal
injury.
IMPORTANT
•
The motion sensor's operation may
become unstable, depending on the
usage environment such as keeping
objects near the motion sensor or
placing the machine in a busy location.
•
If you feel that something is wrong
with the motion sensor, change
the sensitivity setting with [Sensor
Sensitivity] under [Use Motion Sensor]
in [Settings/Registration].
Power Supply
WARNING
•
Do not damage or modify the power
cord. Also, do not place heavy objects
on the power cord, or pull on or
excessively bend it, as this could cause
electrical damage and result in a fire or
electrical shock.
•
Keep the power cord away from a heat
source; failure to do this may cause the
power cord coating to melt, resulting
in a fire or electrical shock.
•
Do not connect or disconnect the
power cord with wet hands, as this may
result in electrical shock.
•
Do not connect the power cord to
a multiplug power strip, as this may
cause a fire or electrical shock.
•
Do not bundle up or tie the power cord
in a knot, as this may result in a fire or
electrical shock.
•
Insert the power plug completely into
the power outlet, as failure to do so
may result in a fire or electrical shock.
•
Do not use power cords other than the
power cord provided, as this may result
in a fire or electrical shock.
•
The provided power cord is intended
for use with this machine. Do not
connect the power cord to other
devices.
•
As a general rule, do not use extension
cords. Using an extension cord may
result in a fire or electrical shock.
•
Do not use power supplies with
voltages other than those specified
herein, as this may result in a fire or
electrical shock.
•
Always grasp the power plug when
disconnecting the power cord. Pulling
on the power cord may expose or snap
the core wire, or otherwise damage
the power cord. If the power cord is
damaged, this could cause current
to leak, resulting in a fire or electrical
shock.
IMPORTANT
Install this machine near the power outlet
and leave sufficient space around the
power plug so that it can be unplugged
easily in an emergency.
repair that may not be covered under
your Limited Warranty.
WARNING
Indicates a warning concerning operations
that may lead to death or injury to persons
if not performed correctly. To use the
machine safely, always pay attention to
these warnings.
CAUTION
Indicates a caution concerning operations
that may lead to injury to persons if not
performed correctly. To use the machine
safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and
restrictions. Be sure to read these items
carefully to operate the machine correctly,
and avoid damage to the machine or
property.
Installation
WARNING
•
Never block the ventilation slots
and louvers on the machine. These
openings are provided for proper
ventilation of working parts inside the
machine. Blocking these openings can
cause the machine to overheat. Never
place the machine on a soft surface,
such as a sofa or rug.
•
Do not install the machine in the
following locations:
–
A damp or dusty location
–
A location near water faucets or water
–
A location exposed to direct sunlight
–
A location subject to high
temperatures
–
A location near open flames
•
Do not install the machine near alcohol,
paint thinner, or other flammable
substances. If flammable substances
come into contact with electrical parts
inside the machine, it may result in a
fire or electrical shock.
•
Do not place the following items on
the machine. If these items come into
contact with a high-voltage area inside
the machine, it may result in a fire or
electrical shock.
If these items are dropped or spilled
inside the machine, immediately
turn OFF the main power switch, and
disconnect the power cord from the
power outlet. Then, contact your local
authorized Canon dealer.
–
Necklaces and other metal objects
–
Cups, vases, flowerpots, and other
containers filled with water or liquids
CAUTION
•
Do not install the machine in unstable
locations, such as unsteady platforms
or inclined floors, or in locations subject
to excessive vibrations, as this may
cause the machine to fall or tip over,
resulting in personal injury.
Handling Precautions
•
Do not attempt to disassemble or
modify the machine.
•
Some parts inside the machine
are subject to high-voltages and
temperatures. Take adequate
precautions when inspecting the
inside of the machine. Do not carry out
any inspections that are not described
in the manuals for this machine.
•
Be careful not to spill liquid or drop
any foreign objects, such as paper
clips or staples inside the machine. If a
foreign object comes into contact with
electrical parts inside the machine, it
might cause a short circuit and result
in a fire or electrical shock.
•
If there is smoke, or unusual noise,
immediately turn the main power
switch OFF, disconnect the power cord
from the power outlet, and then call
your local authorized Canon dealer.
Using the machine in this state may
cause a fire or electrical shock. Also,
avoid placing objects around the
power plug so that the machine can
be disconnected whenever necessary.
•
Do not turn the main power switch
OFF or open the covers while the
machine is in operation. This may result
in paper jams.
•
Do not use flammable sprays, such as
spray glue, near the machine. There is
a danger of ignition.
•
For safety reasons, press
(Energy
Saver) when it will not be used for a
long period of time, such as overnight.
As an added safety measure, turn
OFF the main power switch, and
disconnect the power cord when
the machine will not be used for an
extended period of time, such as
during consecutive holidays.
•
Use a modular cable that is shorter
than 9' 10" (3 meters).
•
Use a USB cable that is shorter than
9' 10" (3 meters).
If the operating noise concerns you
•
Depending on the use environment
and operating mode, if the operating
noise is of concern, it is recommended
that the machine be Installed in a
place other than the office.
Important Safety
Instructions
Please read these "Important Safety
Instructions" thoroughly before operating
the machine. As these instructions are
intended to prevent injury to the user or
other persons or destruction of property,
always pay attention to these instructions.
Also, since it may result in unexpected
accidents or injuries, do not perform any
operation unless otherwise specified in
the manual. Improper operation or use
of this machine could result in personal
injury and/or damage requiring extensive
