imageRUNNER ADVANCE C2200 Series Service Guide
imageRUNNER ADVANCE C2200 Series
Service Guide
March 2013
Revision 1
Page 88
Table 30 – Envelope Feeder Attachment-D1 (Optional) Specifications
Item
Specifications
Acceptable Envelopes
COM10 No. 10, Monarch, DL, and ISO-C5
Capacity
50 envelopes (or stacked to a height of 1 1/4” (30 mm))
Feeding Speed
COM10 No. 10:
10 cpm (copies per minute)
Monarch, DL, ISO-C5: 12 cpm
Dimensions (H x W x D)
3 1/4” x 17 1/4” x 12 1/8” (81 mm x 439 mm x 307 mm)
Weight
Approximately 2.6 lb (1.2 kg)
Table 31 – Staple Finisher-M1 (Optional) Specifications
Item
Specifications
Paper Size/Weight/Type
Size:
12 5/8” x 17 11/16”, 12” x 18”, 11” x 17”, LGL, LTR, LTRR, STMT,
STMTR, EXEC, Custom Size (3 7/8” x 5 1/2”, to 12 5/8” x 18” (99 mm x
139.7 mm to 320 mm x 457.2 mm)), and Envelopes
Weight: 17 lb bond to 80 lb cover (64 to 220 g/m
2
)
Type:
Thin, Plain 1 (17 to 20 lb bond (64 to 80 g/m
2
)), Plain 2 (22 to 26 lb
bond (83 to 99 g/m
2
)), Plain 3 (27 to 28 lb bond (100 to 105 g/m
2
)),
Color, Recycled, Pre-Punched, Bond, Heavy 1 (29 to 32 lb bond (106
to 120 g/m
2
)), Heavy 2 (33 lb bond to 60 lb cover (121 to 163 g/m
2
)),
Heavy 3 (61 to 80 lb cover (164 to 220 g/m
2
)), Tracing, Coated, Labels,
Transparencies, and Envelopes
Capacity Per Tray (Upper)
No Finishing Modes, Collate, Group Mode Set
LTR, EXEC, STMTR: 1,300 sheets (or 7 3/8” (188 mm) in height)
12” x 18”, 11” x 17”, LGL, LTRR:
650 sheets (or 3 3/4” (96 mm) in height)
C Offset, Group + Offset Modes Set
LTR and EXEC:
1,300 sheets (or 7 3/8” (188 mm) in height)
11” x 17”, LGL, LTRR: 650 sheets (or 3 3/4” (96 mm) in height)
Staple Mode Set
LTR and EXEC: 1,300 sheets/30 sets (or 7 3/8” (188 mm) in height)
11” x 17”, LGL, LTRR: 650 sheets/30 sets (or 3 3/4” (96 mm) in height)
No Finishing Modes Set, Collate, Group Modes with Different Paper
Sizes
650 sheets (or 3 3/4” (96 mm) in height)
Staple Mode with Different Paper Sizes
650 sheets/30 sets (or 3 3/4” (96 mm) in height)
48 Only envelopes that are placed horizontally can be output from the Staple Finisher-M1, Booklet Finisher-M1, and Inner
Finisher-F1.
