When the drum unit approaches the end of its service life and needs to be replaced, a message appears on
the touch panel display. Follow the procedure described below to replace the drum unit.
IMPORTANT
For high-quality printouts, when replacing the drum unit we recommend using a Canon drum unit.
Store drum units in a location away from light sources such as direct sunlight.
Storing the drum unit in a room that is cold but rapidly heated, or has other rapid temperature
changes, causes water droplets (condensation) to form inside it.
Do not remove the orange protective cover until you insert the drum unit into the machine.
NOTE
Complete instructions on how to replace the drum unit can be accessed by pressing [Previous] or
[Next] on the touch panel display.
Depending on your contract, a message prompting you to replace the drum unit may appear on the
bottom of the touch panel display.
When you finish replacing the drum unit, press [Close].
1.
Remove the waste toner container.
1. Open the front cover of the main unit.
2. Pull out the waste toner container.
Replacing the Drum Unit
Sida 26 av 42
Canon imageRUNNER ADVANCE C351iF/C350i/C250i e-handbok
2015-05-11