Envelopes can be loaded into Paper Drawer 1 and the multi-purpose tray. For information on envelopes
that can be loaded, see
"Tillåtet pappersmaterial."
For instructions on loading envelopes into the multi-
purpose tray, see
"Fylla på kuvert i universalfacket."
IMPORTANT
Do not forcefully move the front and left guides of the paper drawer in the wrong direction. Doing so
may damage the paper drawer.
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints, or make the
inside of the machine dirty.
Do not load the following types of envelopes inside the envelope cassette. Doing so may cause
paper jams, dirty prints, or make the inside of the machine dirty.
Curled, creased, or folded envelopes
Very thick or thin envelopes
Damp or wet envelopes
Torn envelopes
Irregularly shaped envelopes
Envelopes with clasps or windows
Envelopes that have already been sealed
Envelopes with holes or perforations
Envelopes with specially coated surfaces
Envelopes made of surface treated coloured paper
Envelopes that are self-sticking, which use ink, glue, or other substances that can melt, burn,
vaporize, or emit smells under the heat of a fixing unit (approximately 200°C). Depending on the
materials used for the seal, the glue may melt under the fixing unit's heat, sealing the envelopes.
If you are printing on envelopes, empty the output tray when up to 10 printed envelopes accumulate
in the tray.
Envelopes should be stored in a place away from high-temperatures and humidity.
If there is a temperature difference between the location where the envelopes are stored and the
location where the envelopes are being printed, leave the envelopes in the printing location at room
temperature before you use them.
Correctly match the [Paper Settings] in [Preferences] (Settings/Registration) with the size of the
envelopes being loaded. Failure to do so may cause paper jams, dirty prints, or make the inside of
the machine dirty.
Attaching the Envelope Feeder Attachment
Preparing the Envelopes
Loading Envelopes
Attaching the Envelope Feeder Attachment
Attach the Envelope Feeder Attachment before loading envelopes to a paper drawer.
NOTE
When using the ISO-C5 envelopes, the Envelope Feeder Attachment does not need to be attached.
Proceed to
"Preparing the Envelopes."
1.
Open the paper drawer, and remove the Envelope Feeder Attachment.
(1)Grip the handle, and pull out the paper drawer until it stops.
Loading Envelopes
Sida 7 av 42
Canon imageRUNNER ADVANCE C351iF/C350i/C250i e-handbok
2015-05-11
