Canon
imageRUNNER ADVANCE C5200 Series Service Guide
imageRUNNER ADVANCE C5200 Series Service Guide
March 2014
Revision 3
Page 58
J. Firmware Upgrades Using the Service Support Tool
The SST (Service Support Tool) (version 4.72 or later) is available via Canon’s
for upgrading and backup/restore of RAM data.
1.
Upgrade Functions:
The SST can upgrade the following system components:
System Software stored on the HDD
Main Engine Firmware
Accessory Firmware (Refer to the Service Support Tool User Manual
for a list of Supported Devices and Accessories)
MEAP Contents
Language
HDD Format
RUI (Remote User Interface) stored on the HDD
BootROM stored on a FDIMM (Flash Double Inline Memory Module)
on the Main Controller PCB (Printed Circuit Board)
The imageRUNNER ADVANCE devices support firmware downloads from
the SST and a USB memory stick. When the hard disk drive is replaced,
the SST is used to format the new HDD and load software.
2.
Backup / Restore RAM Data
If replacing and PCBs with FDIMMs attached or initializing RAM, the
Service Support Tool can be used to create a backup file of the RAM data
on the FDIMMs and saved to a PC. Once the PCB has been replaced, the
RAM backup file can be restored to the imageRUNNER ADVANCE and
factory settings restored.
Summary of Contents for ImageRUNNER Advance C5235A
Page 1: ...Canon Service Guide ...