Canon
imageRUNNER ADVANCE C5200 Series Service Guide
imageRUNNER ADVANCE C5200 Series Service Guide
March 2014
Revision 3
Page 70
S. Periodic Maintenance
The parts in the table below must be periodically: replaced, cleaned, inspected
or adjusted to ensure a specific level of machine performance. These parts are
likely to affect the performance once they fail even in the absence of external
change or damage. Whenever possible, plan periodic maintenance so that it
will coincide with a scheduled service visit.
Table 36 – Main Unit Periodic Maintenance
Part Name
Estimated Interval
Remarks
20,000
50,000
100,000
150,000
300,000
500,000
: Replacement
: Cleaning
: Inspection
: Adjustment
Dust-blocking glass
Clean with the dust-blocking
glass cleaning tool
Dust-blocking glass
cleaning pad
Clean when the ITB
Cleaning Blade is replaced.
Developing unit (Y)
Developing unit (M)
Developing unit (C)
Developing unit (Bk)
Primary transfer roller
(Color)
Primary transfer roller
(Bk)
Secondary transfer inner
roller
Replace when the
Secondary Transfer Outer
Roller is replaced
Secondary transfer outer
roller
Transfer separation
guide unit
ITB (intermediary
transfer belt)
Patch sensor
Clean when the ITB is
replaced. Clean with lint-free
paper moistened with water
3 times in one direction
ITB cleaning blade
Film unit
Pressure roller
Fixing bearing
Shutter cover
Clean when the Film Unit is
replaced
Fixing separation guide
Summary of Contents for ImageRUNNER Advance C5235A
Page 1: ...Canon Service Guide ...